Andre Belanger
- Total activity 49
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 11
Comments
Votes on activity by Andre Belanger-
Hello Etienne, For best battery life you should definitely NOT use an LDO between the coin cell and the Apollo3Blue. Apollo3Blue includes internal DC-DC regulators to generate the very low core vol...
-
Please write value of 0 to BMB register to disable the watchdog timer.
-
-
FOUT is an open drain pin, so it requires an external pull-up. I suggest you consider using CLKOUT pin which is a push-pull output.
-
The large amount of halts that you paste into the J-Link commader window immediately befopre releasng reset should be at least 100 long and look something like the following. You should copy the f...
-
John, I responded yesterday morning to the support ticket you submitted with this same question. If you need further clarification on the recovery method I recommended, please submit your questio...
-
For both Apollo1 and Apollo2, all of the external VDD rails must be the same voltage. For Apollo2 this means VDD = VDDP = VDDA = VDDH. For Apollo1, the maximum ADC input voltage is determined by t...